sales_wjw의 등록된 링크

키자드에 등록된 총 335개의 포스트를 확인하실 수 있습니다.

Naver Blog

EN 10269, X22CrMoV12-1 ROUND BAR

EN 10269는 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties의 규정입니다. 그 중 X22CrMoV12-1 (DIN 1.4923)의 화학성분의 경우 아래의 표와 같습니다. Element X22CrMoV12-1 (DIN 1.4923) C 0.18 - 0.24 Si ≤ 0.50 Mn 0.40 - 0.90 P ≤ 0.025 S ≤ 0.015 Cr 11.00 - 12.50 Mo 0.80 - 1.20 Ni 0.30 - 0.80 V 0.25 - 0.35 EN 10269, X22CrMoV12-1의 기계적 성질은 아래와 같습니다. Condition Diameter (mm) Proof strength Rp0.2, MPa, min. Tensile strength Rm, MPa Elongation after fracture A%, min. Reduction in area, Z%, min Imp

Naver Blog

AMS5659 (15-5PH) ROUND BAR

AMS5659는 Steel, Corrosion Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu Consumable Electrode Remelted Solution Heat Treated, Precipitation Hardenable의 규정입니다. AMS5659의 화학성분의 경우 아래의 표와 같습니다. Element AMS5659 Carbon, max 0.07 Manganese, max 1.00 Phosphorus, max 0.030 Sulfur, max 0.015 Silicon, max 1.00 Nickel 3.50 - 5.50 Chromium 14.00 - 15.50 Columbium 5*C - 0.45 Copper 2.50 - 4.50 Molybdenum, max 0.50 AMS5659 (15-5PH)의 기계적 성질은 아래와 같습니다. Hardening or Precipitation

Naver Blog

ASTM F90 UNS R30605 (L-605)

ASTM F90은 Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)의 규정입니다. 그 중 UNS R30605의 화학성분의 경우 아래의 표와 같습니다. Element UNS R30605 Carbon 0.05 - 0.15 Manganese 1.00 - 2.00 Silicon, max 0.40 Phosphorus, max 0.040 Sulfur, max 0.030 Chromium 19.00 - 21.00 Nickel 9.00 - 11.00 Tungsten 14.00 - 16.00 Iron, max 3.00 Cobalt balance ASTM F90 UNS R30605의 기계적 성질은 아래와 같습니다. Condition Tensile Strength, min, ksi (MPa) Yield Strength (0.2 % Offset), min, ksi (MPa) Elongation in

Naver Blog

ASTM B575 UNS N06455 (ALLOY C-4) PLATE

ASTM B575는 Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel- Chromium-Molybdenum-Tantalum, and Low-Carbon Nickel- Chromium-Molybdenum-Tungsten Alloy Plate, Sheet, and Strip의 규정입니다. 그 중 UNS N06455 (ALLOY C-4)의 화학성분의 경우 아래의 표와 같습니다. Element UNS N06455 (ALLOY C-4) Molybdenum 14.0 - 17.0 Chromium 14.0 - 18.0 Iron, max 3.0 Cobalt, max 2.0 Carbon, max 0.015 Silicon, max 0.08 Manganese, max 1.0 Phosphorus, max 0.04 Sulfur, max 0.03 Titanium, max 0.7 Nickel Sh

Naver Blog

EN 573-3 AW-2011 ROUND BAR

EN 573-3은 Aluminium and aluminium alloys — Chemical composition and form of wrought products Part 3: Chemical composition and form of products의 규정입니다. 화학성분의 경우 아래의 표와 같습니다. Element AW-2011 Si 0.40 이하 Fe 0.7 이하 Cu 5.0 - 6.0 Zn 0.30 이하 Bi 0.20 - 0.6 Pb 0.20 - 0.6 기타 원소 0.05 이하 기타 원소 합계 0.15 이하 Al Balance EN 754-2 AW-2011의 기계적 성질은 아래와 같습니다. 질별 직경 Tensile strength, ksi Yield Strength (0.2 % offset), min, ksi Elongation, min % HBW (Typical value) T3 40mm 이하 320 이상 270 이상 10 이상 90 40mm초과 50mm이하 300 이상 250 이상 10

Naver Blog

ASTM A753 UNS K94490

ASTM A753은 Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)의 규정입니다. 그 중 UNS K94490의 화학성분의 경우 아래의 표와 같습니다. Element UNS K94490 Carbon, max 0.05 Manganese, max 0.80 Phosphorus, max 0.03 Sulfur, max 0.01 Silicon, max 0.50 Nickel 43.5 - 46.5 Chromium, max 0.30 Molybdenum, max 0.30 Cobalt, max 0.50 Copper, max 0.30 Iron balance ASTM A753 UNS K94490 의 자기적 특성은 아래와 같습니다. Bar, Wire, Plate, Plate Coil d > 12.7mm (Relative) Permeability at 40 G (14 mT), min - (Relative) Permeability at 10

Naver Blog

노멀라이징 / NORMALIZING (불림 열처리)

21 불림 열처리 노멀라이징 / NORMALIZING (불림 열처리) 이란? 노멀라이징(Normalizing, 불림 열처리)는 금속 제조 및 가공(압연, 단조, 주조 등) 과정에서 치우친 불균일한 조직을 표준(Normal) 상태로 돌려놓는다는 의미에서 '노멀라이징'이라고 불립니다. 강재의 내부 조직을 균일하게 만들고 미세화하여 결정립 결정 크기를 가다듬고 잔류 응력을 제거하는 기초 결정 구조 개선 열처리 과정으로 주로 탄소강, 합금강, 구조용 강재 및 압력용기용 강재 등에 적용됩니다. 노멀라이징 / NORMALIZING (불림 열처리) 목적 조직 균일화 제조 과정에서 발생한 불균일한 미세조직을 개선하고 기계적 성질을 향상시킵니다. 가공성 개선 금속을 깎아내는 가공이 잘 되도록 단단함과 가공성의 균형을 맞춥니다. 후속 열처리 전 단계 침탄(Carburizing), 담금질(Quenching), 뜨임(Tempering) 등 본 열처리를 진행하기 전, 균열이나 변형을 예방하고 적합한 조직을 형성합니다. 임포

Naver Blog

ASTM A753 UNS N14080

ASTM A753은 Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)의 규정입니다. 그 중 UNS N14080의 화학성분의 경우 아래의 표와 같습니다. Element UNS N14080 Carbon, max 0.05 Manganese, max 0.80 Phosphorus, max 0.02 Sulfur, max 0.01 Silicon, max 0.50 Nickel 79.0 - 82.0 Chromium, max 0.30 Molybdenum 3.5 - 6.0 Cobalt, max 0.50 Copper, max 0.30 Iron balance ASTM A753 UNS N14080 의 자기적 특성은 아래와 같습니다. Bar, Wire, Plate, Plate Coil d > 12.7mm (Relative) Permeability at 40 G (14 mT), min 35 000 (Relative) Permeability

Naver Blog

ASTM A479 UNS S31254 ROUND BAR

ASTM A479는 Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels의 규정입니다. 그 중 UNS S31254의 화학성분의 경우 아래의 표와 같습니다. Element UNS S31254 Carbon, max 0.020 Manganese, max 1.00 Phosphorus, max 0.030 Sulfur, max 0.010 Silicon, max 0.80 Nickel 17.5 - 18.5 Chromium 19.5 - 20.5 Molybdenum 6.0 - 6.5 Nitrogen 0.18 - 0.22 Copper 0.50 - 1.00 ASTM A479 UNS S31254 의 기계적 성질은 아래와 같습니다. Tensile Strength, min, ksi (MPa) Yield Strength, min, ksi (MPa) Elongation in 2 in. [50 mm] or 4D, min, % Reduction of

Naver Blog

ASTM A801 TYPE1 UNS R30005

ASTM A801은 Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650)의 규정입니다. 그 중 UNS R30005의 화학성분의 경우 아래의 표와 같습니다. Element UNS R30005 Carbon, max 0.025 Manganese, max 0.15 Silicon, max 0.15 Phosphorus, max 0.015 Sulfur, max 0.010 Chromium, max 0.15 Nickel, max 0.25 Vanadium 1.75 - 2.10 Iron Remainder Cobalt 47.50 - 49.50 ASTM A801 TYPE1 UNS R30005의 자기적 특성은 아래와 같습니다. UNS R30005 Minimum Magnetic Flux Density, for Magnetic Field Strengths 800 A/m (10 Oe) 1.6 kA/m (20 Oe) 4 kA/m (50 Oe) 8 kA

Naver Blog

ASTM B333 UNS N10665 (ALLOY B-2) PLATE

ASTM B333은 Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip의 규정입니다. 그 중 UNS N10665 (ALLOY B-2)의 화학성분의 경우 아래의 표와 같습니다. Element UNS N10665 Molybdenum 26.0 - 30.0 Chromium, max 1.0 Iron, max 2.0 Cobalt, max 1.00 Carbon, max 0.02 Silicon, max 0.10 Manganese, max 1.0 Phosphorus, max 0.04 Sulfur, max 0.03 Nickel Shall be determined arithmetically by difference. ASTM B333 UNS N10665 (ALLOY B-2)의 기계적 성질은 아래와 같습니다. Tensile Strength, min, psi (MPa) Yield Strength (0.2 % Offset), min, psi (

Naver Blog

ASTM F30 UNS K94100 (INVAR42)

ASTM F30은 Standard Specification for Iron-Nickel Sealing Alloys의 규정입니다. 그 중 UNS K94100 (INVAR42)의 화학성분의 경우 아래의 표와 같습니다. Element UNS K94100 (INVAR42) Iron remainder Nickel, nominal 41 Cobalt, max Present as an incidental element and shall be reported separately. Manganese, max 0.80 Silicon, max 0.30 Carbon, max 0.05 Aluminum, max 0.10 Chromium, max 0.25 Phosphorus, max 0.025 Sulfer, max 0.025 ASTM F30 UNS K94100 (INVAR42)의 기계적 성질은 아래와 같습니다. Temperature Range, Average Linear Coefficient of Thermal Expansio

Naver Blog

ASTM B211 A2024 알루미늄 환봉

ASTM B211은 Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire의 규정입니다. 화학성분의 경우 아래의 표와 같습니다. Element A2024 Si 0.50 이하 Fe 0.50 이하 Cu 3.8 - 4.9 Mn 0.30 - 0.9 Mg 1.2 - 1.8 Cr 0.10 이하 Zn 0.25 이하 Ti 0.15 이하 기타 원소 0.05 이하 기타 원소 합계 0.15 이하 Al Balance ASTM B211 A2024의 기계적 성질은 아래와 같습니다. 질별 직경 Tensile strength, ksi Yield Strength (0.2 % offset), min, ksi Elongation in 2 in. or 4× Diameter, min % T351 12.7mm이상 165.1mm이하 62 이상 45 이상 10 이상 165.1mm초과 203.2mm이하 9 이상 ASTM B211 A2024 비중은 2.79 g/cm ³ 입니다

Naver Blog

AMS5737 (A286) ROUND BAR

AMS 5737은 Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Stock for Forging and Heading 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V (A286) Consumable Electrode Remelted 1650 F (899 C) Solution and Precipitation Heat Treated의 규정입니다. 화학성분의 경우 아래의 표와 같습니다. Element AMS5737 Carbon, max 0.08 Manganese, max 2.00 Phosphorus, max 0.025 Silicon, max 1.00 Sulfur, max 0.025 Chromium 13.50 - 16.00 Molybdenum 1.00 - 1.50 Nickel 24.00 - 27.00 Titanium 1.90 - 2.35 Aluminum, max 0.35

Naver Blog

ASTM B162 UNS N02200 (ALLOY 200) PLATE

ASTM B162는 Nickel Plate, Sheet, and Strip의 규정입니다. 그 중 UNS N02200 (ALLOY 200)의 화학성분의 경우 아래의 표와 같습니다. Element UNS N02200 Nickel, min 99.0 Copper, max 0.25 Iron, max 0.40 Manganese, max 0.35 Carbon, max 0.15 Silicon, max 0.35 Sulfur, max 0.01 ASTM B162 UNS N02200 (ALLOY 200)의 기계적 성질은 아래와 같습니다. Nickel200 (UNS N02200) Tensile Strength, min, psi (MPa) Yield Strength (0.2 % Offset), min, psi (MPa) Elongation in 2 in. or 50 mm, or 4D, min,% Rockwell Hardness (B Scale) Annealed Hot rolled plate Hot rolled sheet Co

Naver Blog

EN 10089, 52CrMoV4

EN 10089는 Hot rolled steels for quenched and tempered springs의 규정입니다. 그 중 52CrMoV4의 화학성분의 경우 아래의 표와 같습니다. 52CrMoV4 C Si, max Mn P, max S, max Cr Mo V Cu + Sn 1.7701 (Steel number) 0.48 - 0.56 0.40 0.70 - 1.10 0.025 0.025 0.90 - 1.20 0.15 - 0.30 0.10 - 0.20 Cu+10Sn+/-0.6 EN 10089, 52CrMoV4의 기계적 성질은 아래와 같습니다. Maximum Brinell hardness in the heat treatment condition Treated to improve shearability (+S) Soft annealed (+A) Annealed to achieve spheroidization of the carbides (+AC) 280 248 230 EN 10089, 52CrMoV4

Naver Blog

초음파 비파괴 검사 UT TEST (ULTRASONIC TEST)

20 초음파 비파괴 검사 초음파 비파괴 검사 UT TEST (ULTRASONIC TEST) 란? 초음파 비파괴 검사는 재료에 초음파를 쏘아 내부 불연속부에서 되돌아오는 반사파를 해석하는 방식입니다. 겉보기에 완벽한 소재 안에 숨어 있는 개재물, 기공, 라미네이션, 수축공, 균열을 잡아냅니다. 두께가 두꺼운 제품일수록, 그리고 파괴 시 결과가 치명적인 용도일수록 초음파 비파괴 검사의 중요도가 올라갑니다. 실제 현장에 적용할 때는 몇 가지 물리적, 운용상 제약 사항을 명확히 인지해야 합니다. 1) 검사원의 숙련도에 대한 의존성이 매우 높습니다. 2) 표면 상태와 형상에 따른 신호 전달 제약이 존재합니다. 3) UT는 내부 결함 검사입니다. 표면 및 표면 직하 결함은 잡지 못하므로, 중요 부품은 MT나 PT를 병행합니다. * 비파괴검사(NDT)는 크게 표면 검사와 내부 검사로 나뉩니다. 표면 결함 내부 결함 자분탐상(MT) 초음파탐상(UT) 침투탐상(PT) 방사선투과시험(RT) 대표적 UT 검사 기준 생산

Naver Blog

ASTM A479 UNS S31635 (TP316Ti) ROUND BAR

ASTM A479는 Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels의 규정입니다. UNS S31635 (TP316Ti)의 화학성분의 경우 아래의 표와 같습니다. Element UNS S31635 (TP316Ti) Carbon, max 0.08 Manganese, max 2.00 Phosphorus, max 0.045 Sulfur, max 0.030 Silicon, max 1.00 Nickel 10.0 - 14.0 Chromium 16.0 - 18.0 Molybdenum 2.00 - 3.00 Titanium 5*(C+N) - 0.70 Nitrogen 0.10 ASTM A479 UNS S31635 (TP316Ti)의 기계적 성질은 아래와 같습니다. Tensile Strength, min, ksi (MPa) Yield Strength, min, ksi (MPa) Elongation in 2 in. [50mm] or

Naver Blog

니켈 함량에 따른 응력부식균열 정리

17 니켈 함량과 응력부식균열 응력부식균열 이란? 응력부식균열(Stress Corrosion Cracking, SCC)은 인장응력(Tensile Stress)과 부식환경(Corrosive Environment)이 동시에 존재할 때 재료에 균열이 발생하고 성장하는 현상입니다. 일반적인 부식처럼 재료 전체가 균일하게 부식되는 것이 아니라, 매우 미세한 균열이 시작되어 점차 성장하면서 갑작스러운 파단을 일으킬 수 있다는 점이 특징입니다. 응력부식균열은 세 가지 조건이 동시에 만족될 때 발생합니다. 1. 인장 응력 (설비 하중, 잔류응력, 열응력 등) 2. 부식 환경 3. 일정 수준 이상의 온도 니켈 함량에 따라 응력부식균열을 정의 할 수 있을까? 니켈 함량에 따라 응력부식균열을 정의한 대표적인 논문인 H.R. Copson, "Effect of Composition on Stress Corrosion Cracking of Some Alloys Containing Nickel", Physical Metallu

Naver Blog

스테인레스강의 탄소함량에 따른 차이점

18 스테인레스강의 탄소함량에 따른 차이점 스테인레스강의 탄소함량에 따른 차이점 스테인레스강에서 탄소(C)는 내식성(입계부식), 용접성, 상온 강도, 고온 크리프 강도를 결정짓는 가장 핵심적인 원소입니다. 탄소 함량에 따라 크게 저탄소급(L), 일반급, 고탄소급(H)으로 분류되며 탄소(C)는 함량이 낮을수록(L급) 용접 시 입계부식을 막아 내식성과 시공성에 유리하고, 함량이 높을수록(H급) 고온에서 미세 탄화물을 형성해 고온 크리프 강도를 극대화합니다. 저탄소급 (Low Carbon) 고탄소급 (High Carbon) 입계부식 방지, 용접성 우수 저탄소 대비 우수한 강도, 크리프 강도 우수 입계부식 이란? 스테인레스강의 입계부식은 열노출이나 용접 시 결정립계에 크롬 탄화물이 석출되면서 주변 크롬 농도가 국부적으로 떨어져(크롬 고갈대) 경계면을 따라 선택적으로 침식되는 현상입니다. 저탄소강이 입계부식(Intergranular Corrosion)에 강한 이유는 크롬(Cr)과 결합할 '탄소(C)의 절대적인

Naver Blog

공식저항지수 PREN(Pitting Resistance Equivalent Number)

19 공식저항지수 PREN 공식저항지수 PREN(Pitting Resistance Equivalent Number) 이란? 공식저항지수 PREN(Pitting Resistance Equivalent Number)는 금속 재료(특히 스테인레스강)가 염소 이온 환경(해수, 화학 공정 등)에서 국부적으로 구멍이 뚫리는 '공식(Pitting Corrosion, 孔食)' 현상에 얼마나 잘 견디는지를 수치화한 지표입니다. 단, 이론적으로 완벽히 도출된 물리 법칙이 아니라, 스테인레스강(Fe 기반 합금)의 실험 데이터(CPT, ASTM G48 등)를 회귀분석(Regression)하여 만든 경험식으로 주의할 필요가 있습니다. * 공식(Pitting Corrosion, 孔食)은 금속 표면의 전체적인 두께 감소는 거의 없으나, 특정 미세 부위가 집중적으로 뚫리면서 바늘구멍(Pit) 모양의 깊은 구멍이 형성되는 국부 부식(Localized Corrosion) 현상입니다. 외관상 손상이 잘 드러나지 않아 방치되기 쉽지만,

Naver Blog

AMS5663 (ALLOY 718) ROUND BAR

AMS 5663은 Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings, and Stock for Forgings and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 F (968 C) Solution and Precipitation Heat Treated의 규정입니다. 화학성분의 경우 아래의 표와 같습니다. Element AMS5663 (ALLOY 718) Carbon 0.08, max Manganese 0.35, max Silicon 0.35, max Phosphorus 0.015, max Sulfur 0.015, max Chromium 17.00 - 21.00 Cobalt 1.00, max Molybdenum 2.80 - 3.30 Columbium 4.75 - 5.5

Naver Blog

AMS5662 (ALLOY 718) ROUND BAR

AMS 5662는 Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings, and Stock for Forgings and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 F (968 C) Solution Heat Treated, Precipitation-Hardenable의 규정입니다. 화학성분의 경우 아래의 표와 같습니다. Element AMS5662 (ALLOY 718) Carbon 0.08, max Manganese 0.35, max Silicon 0.35, max Phosphorus 0.015, max Sulfur 0.015, max Chromium 17.00 - 21.00 Cobalt 1.00, max Molybdenum 2.80 - 3.30 Columbium 4.

Naver Blog

AMS 5878 (ALLOY 230) SHEET

AMS5878 은 Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate, 59Ni - 22Cr - 2Mo - 14W - 0.35AI - 0.03La (Alloy No. 230), Solution Heat Treated의 규정입니다. 화학성분의 경우 아래의 표와 같습니다. Element AMS5878 Nickel Remainder Iron, max 3.00 Chromium 20.00 - 24.00 Cobalt, max 5.00 Molybdenum 1.00 - 3.00 Tungsten 13.00 - 15.00 Carbon 0.05 - 0.15 Silicon 0.25 - 0.75 Manganese 0.30 - 1.00 Phosphorus, max 0.03 Sulfur, max 0.015 Aluminum 0.20 - 0.50 Lanthanum 0.005 - 0.05 Boron, max 0.015 Titanium, max 0.10 Coppe

Naver Blog

ASTM B265 Gr.4 TITANIUM PLATE

ASTM B265는 Titanium and Titanium Alloy Strip, Sheet, and Plate의 규정입니다. 그 중 GRADE 4의 화학성분의 경우 아래의 표와 같습니다. C (MAX) O (range or max) N (MAX) H (MAX) I (MAX) Ti OtherElements,max. each OtherElements,max. total Gr.4 0.08 0.40 0.05 0.015 0.50 balance 0.1 0.4 ASTM B265 Gr.4의 기계적 성질은 아래와 같습니다. Tensile Strength, min Yield Strength (0.2 % Offset) Elongation in 2 in. or 50 mm, min, % Bend Test (Radius of Mandrel) Gr.4 Ksi MPa Ksi MPa 두께 0.070 in. (1.8 mm) 미만 두께 0.070 to 0.187 in. (1.8–4.75 mm) 80 550 70 - 95 483 -

Naver Blog

ASTM A479 UNS N08367 (AL-6XN) ROUND BAR

ASTM A479는 Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels의 규정입니다. 그 중 UNS N08367 (AL-6XN)의 화학성분의 경우 아래의 표와 같습니다. Element UNS N08367 Carbon, max 0.030 Manganese, max 2.00 Phosphorus, max 0.040 Sulfur, max 0.030 Silicon, max 1.00 Nickel 23.5 - 25.5 Chromium 20.0 - 22.0 Molybdenum 6.0 - 7.0 Nitrogen 0.18 - 0.25 Copper, max 0.75 ASTM A479 UNS N08367 (AL-6XN) 기계적 성질은 아래와 같습니다. Tensile Strength, min, ksi [MPa] Yield Strength, min, ksi [MPa] Elongation in 2 in. [50 mm] or

Naver Blog

철강제품 압연방향과 가공방향의 중요성

15 가공방향의 중요성 철강제품의 압연방향 이란 무엇일까요? 철강재를 회전하는 롤러 사이로 통과시켜 일정한 두께로 펴는 압연 공정에서, 금속의 결정립(Grain)과 비금속 개재물이 길게 늘어나는 진행 방향을 의미합니다. 이를 통해 제품의 기계적 성질에 방향성이 생기며, 가공 시 이 방향성을 고려해야 품질 사고를 방지할 수 있습니다. 압연방향과 가공방향은 중요해요. 철강 제품은 제조 과정 중 압연(Rolling) 공정을 거치면서 결정립(Grain)과 개재물이 특정 방향으로 길게 늘어나는 방향성을 갖게 됩니다. 이러한 특성 때문에 가공 방향을 어떻게 설정하느냐에 따라 최종 제품의 품질과 기계적 성능이 크게 달라집니다. 압연 방향(Rolling Direction, RD)과 그 수직 방향(Transverse Direction, TD)에 따른 주요 영향은 다음과 같습니다. 금속 조직의 변화 (Microstructure) 압연 과정에서 철강 내부의 결정립은 압연 방향으로 길게 늘어납니다. RD

Naver Blog

크리프 강도(Creep Strength)의 중요성

16 크리프 강도의 중요성 크리프 강도(Creep Strength)란 무엇일까요? 고온 환경에서 금속 재료에 일정한 하중(응력)이 지속적으로 가해질 때, 시간이 흐름에 따라 재료의 변형이 서서히 증가하다가 결국 파괴에 이르는 '크리프 현상'에 견디는 저항력을 의미합니다. 일반적으로 특정 온도에서 정해진 시간(예: 10,000시간 또는 100,000시간) 동안 일정량의 변형이 일어나거나 파괴되지 않고 견딜 수 있는 최대 응력으로 나타냅니다. 고온 안정성의 척도: 상온에서는 항복강도 이하의 하중에서 안전한 재료라도, 고온(일반적으로 재융해 온도의 30~40% 이상)에서는 미세구조 내 원자의 확산이나 결정립계 미끄러짐으로 인해 영구적인 변형이 발생합니다. 따라서 발전소 보일러, 가스터빈, 석유화학 플랜트 등 고온 압력 용기 설계 시 가장 중요한 기준이 됩니다. 설계 수명 결정: 크리프 강도는 재료의 기대 수명과 직결됩니다. 사용 온도가 조금만 상승해도 크리프 속도가 급격히 빨라져 부품의

Naver Blog

ASTM A182 UNS K90941 (F9) FORGING

A182는 Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service의 규정입니다. 그 중 UNS K90941 (F9)의 화학성분의 경우 아래의 표와 같습니다. Element UNS K90941 (F9) Carbon, max 0.15 Manganese 0.30 - 0.60 Phosphorus, max 0.030 Sulfur, max 0.030 Silicon 0.50 - 1.00 Chromium 8.0 - 10.0 Molybdenum 0.90 - 1.10 ASTM A182 UNS K90941 (F9)의 기계적 성질은 아래와 같습니다. Tensile Strength, min, ksi [MPa] Yield Strength, min, ksi [MPa] Elongation in 2 in. [50 mm] or 4D, min, % Reduction of Are

Naver Blog

ASTM A479 UNS S31653 (TP316LN) ROUND BAR

ASTM A479는 Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels의 규정입니다. 그 중 UNS S31653 (TP316LN)의 화학성분의 경우 아래의 표와 같습니다. Element S31653 (TP316LN) Carbon, max 0.030 Manganese, max 2.00 Phosphorus, max 0.045 Sulfur, max 0.030 Silicon, max 1.00 Nickel 10.0 - 14.0 Chromium 16.0 - 18.0 Nitrogen 0.10 - 0.16 Molybdenum 2.00 - 3.00 ASTM A479 UNS S31653 (TP316LN)의 기계적 성질은 아래와 같습니다. Tensile Strength, min, ksi (MPa) Yield Strength, min, ksi (MPa) Elongation in 2 in. [50 mm] or 4D, m

Naver Blog

ASTM A790 UNS S31803 PIPE

ASTM A790은 Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe의 규정입니다. 그 중 UNS S31803의 화학성분의 경우 아래의 표와 같습니다. Element UNS S31803 Carbon, max 0.030 Manganese, max 2.00 Phosphorus, max 0.030 Sulfur, max 0.020 Silicon, max 1.00 Nickel 4.5 - 6.5 Chromium 21.0 - 23.0 Molybdenum 2.5 - 3.5 Nitrogen 0.08 - 0.20 ASTM A790 UNS S31803의 기계적 성질은 아래와 같습니다. Tensile Strength, min, ksi (MPa) Yield Strength, min, ksi (MPa) Elongation in 2 in. or 50 mm, min, % Hardness (HBW), max Hardness (HRC), max 90 (62

Naver Blog

EN 10025-2, E360

EN 10025-2는 Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels의 규정입니다. 그 중 E360의 화학성분의 경우 아래의 표와 같습니다. E360 P S N 1.0070 (Steel number) 0.045 max 0.045 max 0.012 max EN 10025-2, E360의 기계적 성질은 아래와 같습니다. E360 Minimum yield strength, ReH MPa Nominal thickness, mm ≤ 16 > 16 ≤ 40 > 40 ≤ 63 > 63 ≤ 80 > 80 ≤ 100 > 100 ≤ 150 > 150 ≤ 200 > 200 ≤ 250 360 355 345 335 325 305 295 285 E360 Tensile strength, Rm MPa Nominal thickness, mm < 3 ≥ 3 ≤ 1

Naver Blog

EN 10083-2, C55

EN 10083-2는 Quenched and tempered steels – Part 2: Technical delivery conditions for unalloyed quality steels의 규정입니다. 그 중 C55의 화학성분의 경우 아래의 표와 같습니다. C55 C Si Mn P S Cr Mo Ni Cr+Mo +Ni 1.0535 (Steel number) 0.52 - 0.60 0.40 max 0.60 - 0.90 0.045 max 0.045 max 0.40 max 0.10 max 0.40 max 0.63 max EN 10083-2, C55의 기계적 성질은 아래와 같습니다. C55 1.0535 HBW in condition, max +S (treated to improve shearability) +A (Soft annealed) 255 229 Condition Size Tensile Strength, MPa Yield Point, min., MPa Elongation, m

Naver Blog

EN 10083-2, C60

EN 10083-2는 Quenched and tempered steels – Part 2: Technical delivery conditions for unalloyed quality steels의 규정입니다. 그 중 C60의 화학성분의 경우 아래의 표와 같습니다. C60 C Si Mn P S Cr Mo Ni Cr+Mo +Ni 1.0601 (Steel number) 0.57 - 0.65 0.40 max 0.60 - 0.90 0.045 max 0.045 max 0.40 max 0.10 max 0.40 max 0.63 max EN 10083-2, C60의 기계적 성질은 아래와 같습니다. C60 1.0601 HBW in condition, max +S (treated to improve shearability) +A (Soft annealed) 255 241 Condition Size Tensile Strength, MPa Yield Point, min., MPa Elongation, m

Naver Blog

ASTM A240 UNS S20910 (Nitronic 50, XM19) PLATE

ASTM A240은 Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications의 규정입니다. 그 중 UNS S20910 (Nitronic 50, XM19)의 화학성분의 경우 아래의 표와 같습니다. Element UNS S20910 Carbon, max 0.06 Manganese 4.00 - 6.00 Phosphorus, max 0.040 Silicon, max 0.75 Sulfur, max 0.030 Chromium 20.5 - 23.5 Nitrogen 0.20 - 0.40 Nickel 11.5 - 13.5 Molybdenum 1.50 - 3.00 Columbium 0.10 - 0.30 Vanadium 0.10 - 0.30 ASTM A240 UNS S20910 (Nitronic 50, XM19)의 기계적 성질은 아래와 같습니다. S

Naver Blog

ASTM A582 UNS S30323 (TP303Se) ROUND BAR

ASTM A582는 Free-Machining Stainless Steel Bars의 규정입니다. 그 중 UNS S30323 (TP303Se)의 화학성분의 경우 아래의 표와 같습니다. Element UNS S30323 (TP303Se) C 0.15 이하 Si 1.00 이하 Mn 2.00 이하 P 0.20 이하 S 0.06 이하 Cr 17.0 - 19.0 Ni 8.0 - 10.0 Se 0.15 이상 ASTM A582 UNS S30323 (TP303Se)의 기계적 성질은 아래와 같습니다. UNS S30323 (TP303Se) Hardness (HB) Annealed 262 max ASTM A582 UNS S30323 (TP303Se) 비중은 8 g/cm ³ 입니다. ASTM A582 UNS S30323 (TP303Se) 은 미국산으로 공급 가능합니다. 입고 일정 및 재고 여부는 별도 연락 부탁드립니다.

Naver Blog

ASTM A276 UNS S42000 (TP420) ROUND BAR

ASTM A276은 Stainless Steel Bars and Shapes의 규정입니다. 그 중 UNS S42000 (TP420)의 화학성분의 경우 아래의 표와 같습니다. Element UNS S42000 (TP420) C 0.15 이상 Si 1.00 이하 Mn 1.00 이하 P 0.040 이하 S 0.030 이하 Cr 12.0 - 14.0 ASTM A276 UNS S42000 (TP420)의 기계적 성질은 아래와 같습니다. UNS S42000 Brinell Hardness, HBW unless otherwise indicated, max Annealed (Hot finished) 241 Annealed (Cold finished) 255 ASTM A276 UNS S42000 (TP420) 비중은 7.8 g/cm ³ 입니다. ASTM A276 UNS S42000 (TP420) 은 미국산, 유럽산으로 공급 가능합니다. 입고 일정 및 재고 여부는 별도 연락 부탁드립니다.

Naver Blog

JIS G 4303 SUS303 스테인레스 환봉

JIS G 4303은 스테인레스 환봉의 규정입니다. 그 중 SUS303의 화학성분의 경우 아래의 표와 같습니다. Element SUS303 C 0.15 이하 Si 1.00 이하 Mn 2.00 이하 P 0.20 이하 S 0.15 이상 Cr 17.00 - 19.00 Ni 8.00 - 10.00 Mo 0.60%를 넘어선 안됨 JIS G 4303 SUS303의 기계적 성질은 아래와 같습니다. Yield point or Proof stress (N/) Tensile strength (N/) Elongation, % Reduction of area, % Brinell HBW / HB Rockwell B HRBS / HRB Vickers HV 205 이상 520 이상 40 이상 50 이상 187 이하 90 이하 200 이 JIS G 4303 SUS303 비중은 7.93 g/cm ³ 입니다. JIS G 4303 SUS303은 일본산으로 공급 가능합니다. 입고 일정 및 재고 여부는 별도 연락 부탁드

Naver Blog

ASTM A582 UNS S42020 (TP420F) ROUND BAR

ASTM A582는 Free-Machining Stainless Steel Bars의 규정입니다. 그 중 UNS S42020 (TP420F)의 화학성분의 경우 아래의 표와 같습니다. Element UNS S42020 (TP420F) C 0.30 - 0.40 Si 1.00 이하 Mn 1.25 이하 P 0.06 이하 S 0.15 이하 Cr 12.0 - 14.0 Ni 0.50 이하 Cu 0.60 이하 ASTM A582 UNS S42020 (TP420F)의 기계적 성질은 아래와 같습니다. UNS S42020 Hardness (HB) Annealed 262 max ASTM A582 UNS S42020 (TP420F) 비중은 7.7 g/cm ³ 입니다. ASTM A582 UNS S42020 (TP420F) 은 미국산, 일본산으로 공급 가능합니다. 입고 일정 및 재고 여부는 별도 연락 부탁드립니다.

Naver Blog

ASTM A240 UNS S32109 (TP321H) PLATE

ASTM A240은 Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications의 규정입니다. 그 중 UNS S32109 (TP321H)의 화학성분의 경우 아래의 표와 같습니다. Element S32109 (TP321H) Carbon 0.04 - 0.10 Manganese, max 2.00 Phosphorus, max 0.045 Sulfur, max 0.030 Silicon, max 0.75 Nickel 9.0 - 12.0 Chromium 17.0 - 19.0 Titanium 4 * (C + N) min, 0.70 max ASTM A240 UNS S32109 (TP321H)의 기계적 성질은 아래와 같습니다. Tensile Strength, min, ksi (MPa) Yield Strength, min, ksi (MPa) Elongat

Naver Blog

ASTM A240 UNS S34709 (TP347H) PLATE

ASTM A240은 Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications의 규정입니다. 그 중 UNS S34709 (TP347H)의 화학성분의 경우 아래의 표와 같습니다. Element S34709 (TP347H) Carbon 0.04 - 0.10 Manganese, max 2.00 Phosphorus, max 0.045 Sulfur, max 0.030 Silicon, max 0.75 Nickel 9.0 - 13.0 Chromium 17.0 - 19.0 Niobium 8 * C min, 1.00 max ASTM A240 UNS S34709 (TP347H)의 기계적 성질은 아래와 같습니다. Tensile Strength, min, ksi (MPa) Yield Strength, min, ksi (MPa) Elongation in

Naver Blog

ASTM A479 UNS S34700 (TP347) ROUND BAR

ASTM A479는 Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels의 규정입니다. 그 중 UNS S34700 (TP347)의 화학성분의 경우 아래의 표와 같습니다. Element S34700 (TP347) Carbon, max 0.08 Manganese, max 2.00 Phosphorus, max 0.045 Sulfur, max 0.030 Silicon, max 1.00 Nickel 9.0 - 12.0 Chromium 17.0 - 19.0 Columbium 10 * C - 1.10 ASTM A479 UNS S34700 (TP347)의 기계적 성질은 아래와 같습니다. Tensile Strength, min, ksi (MPa) Yield Strength, min, ksi (MPa) Elongation in 2 in. [50 mm] or 4D, min, % Reduction of Area, min

Naver Blog

ASTM A276 UNS S41000 (TP410) ROUND BAR

ASTM A276은 Stainless Steel Bars and Shapes의 규정입니다. 그 중 UNS S41000 (TP410)의 화학성분의 경우 아래의 표와 같습니다. Element UNS S41000 (TP410) C 0.08 - 0.15 Si 1.00 이하 Mn 1.00 이하 P 0.040 이하 S 0.030 이하 Cr 11.5 - 13.5 ASTM A276 UNS S41000 (TP410)의 기계적 성질은 아래와 같습니다. UNS S41000 Tensile strength, ksi (MPa), min Yield Strength, ksi (MPa), min Elongation in 2 in [50 mm] or 4D, min, % Reduction of Area, min, % Annealed (Hot finished) 70 (480) 40 (275) 20 45 Annealed (Cold finished) 70 (480) 40 (275) 16 45 Hardened and tem

Naver Blog

ASTM B446 UNS N06625 (ALLOY 625) ROUND BAR

ASTM B446은 Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* Rod and Bar의 규정입니다. 그 중 UNS N06625 (ALLOY 625)의 화학성분의 경우 아래의 표와 같습니다. Element UNS N06625 Carbon, max 0.10 Manganese, max 0.50 Silicon, max 0.50 Phosphorus, max 0.015 Sulfur, max 0.015 Chromium 20.0 - 23.0 Columbium + tantalum 3.15 - 4.15 Cobalt (if determined), max 1.0 Molybdenum 8.0 - 10.0 Iron, max 5.0 Aluminum, m

Naver Blog

ASTM B408 UNS N08810, UNS N08811 (ALLOY 800H/HT) ROUND BAR

ASTM B408은 Nickel-Iron-Chromium Alloy Rod and Bar의 규정입니다. 그 중 UNS N08810, UNS N08811 (ALLOY 800H/HT)의 화학성분의 경우 아래의 표와 같습니다. Element UNS N08810, UNS N08811 Nickel 30.0 - 35.0 Chromium 19.0 - 23.0 Iron, min 39.5 Manganese, max 1.5 Carbon UNS N08810: 0.05–0.10 UNS N08811: 0.06–0.10 Copper, max 0.75 Silicon, max 1.0 Sulfur, max 0.015 Aluminum 0.15 - 0.60 Titanium 0.15 - 0.60 ASTM B408 UNS N08810, UNS N08811 (ALLOY 800H/HT)의 기계적 성질은 아래와 같습니다. UNS N08810 UNS N08811 Annealed Tensile Strength, min, psi

Naver Blog

ASTM B511 UNS N08330 (ALLOY 330) ROUND BAR

ASTM B511은 Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes의 규정입니다. 그 중 UNS N08330 (ALLOY 330)의 화학성분의 경우 아래의 표와 같습니다. Element N08330 (ALLOY 330) Cr 17.0 - 20.0 Fe remainder Pb, max 0.005 Cu, max 1.00 C, max 0.08 Si 0.75 - 1.50 Mn, max 2.00 Sn, max 0.025 P, max 0.03 S, max 0.03 Ni 34.0 - 37.0 ASTM B511 UNS N08330 (ALLOY 330)의 기계적 성질은 아래와 같습니다. Tensile Strength, min, psi (MPa) Yield Strength (0.2 % Offset), min, psi (MPa) Elongation in 2 in. (50 mm) or 4D min, % N08330 70 000 (483) 30 000 (207)

Naver Blog

ASTM A479 UNS S30908 (TP309S) ROUND BAR

ASTM A479는 Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels의 규정입니다. 그 중 UNS S30908 (TP309S)의 화학성분의 경우 아래의 표와 같습니다. Element UNS S30908 (TP309S) Carbon, max 0.08 Manganese, max 2.00 Phosphorus, max 0.045 Sulfur, max 0.030 Silicon, max 1.00 Nickel 12.0 - 15.0 Chromium 22.0 - 24.0 ASTM A479 UNS S30908 (TP309S)의 기계적 성질은 아래와 같습니다. Tensile Strength, min, ksi (MPa) Yield Strength, min, ksi (MPa) Elongation in 2 in. or 50 mm or 4D, min, % Reduction of Area, min, % 75 (515) 30

Naver Blog

ASTM B536 UNS N08330 (ALLOY 330) PLATE

ASTM B536은 Nickel-Iron-Chromium-Silicon Alloys Plate, Sheet, and Strip의 규정입니다. 그 중 UNS N08330 (ALLOY 330)의 화학성분의 경우 아래의 표와 같습니다. Element N08330 (ALLOY 330) Cr 17.0 - 20.0 Fe remainder Pb, max 0.005 Cu, max 1.00 C, max 0.08 Si 0.75 - 1.50 Mn, max 2.00 Sn, max 0.025 P, max 0.03 S, max 0.03 Ni 34.0 - 37.0 ASTM B536 UNS N08330 (ALLOY 330)의 기계적 성질은 아래와 같습니다. Tensile Strength, min, psi (MPa) Yield Strength (0.2 % Offset), min, psi (MPa) Elongation in 2 in. (50 mm) or 4D min, % Hardness, HRB N08330 70

Naver Blog

ASTM B168 UNS N06025 (ALLOY 602CA) PLATE

ASTM B168은 Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel- Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet, and Strip의 규정입니다. 그 중 UNS N06025 (ALLOY 602CA)의 화학성분의 경우 아래의 표와 같습니다. Element UNS N06025 Nickel remainder Chromium 24.0 - 26.0 Iron 8.0 - 11.0 Manganese, max 0.15 Aluminium 1.8 - 2.4 Carbon 0.15 - 0.25 Copper, max 0.1 Silicon, max 0.5 Sulfur, max 0.010 Titanium 0.1

Naver Blog

ASTM A582 UNS S43020 (430F) ROUND BAR

ASTM A582는 Standard Specification for Free-Machining Stainless Steel Bars의 규정입니다. 그 중 UNS S43020 (430F)의 화학성분의 경우 아래의 표와 같습니다. Element UNS S43020 (430F) Carbon, max 0.12 Manganese, max 1.25 Phosphorus, max 0.06 Sulfur, min 0.15 Silicon, max 1.00 Chromium 16.0 - 18.0 ASTM A582 UNS S43020 (430F)의 기계적 성질은 아래와 같습니다. Condition Brinell Hardness Annealed 262, max ASTM A582 UNS S43020 (430F) 비중은 7.8 g/cm ³ 입니다. ASTM A582 UNS S43020 (430F)의 경우 주로 유럽산 및 미국산을 수입하여 국내에 공급하고 있습니다. 입고 일정 및 재고 여부는 별도 연락 부탁드립니다

Naver Blog

AMS5540 SHEET (ALLOY 600)

AMS5540은 Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 74Ni - 15.5Cr - 8.0Fe Annealed의 규정입니다. AMS5540 (ALLOY 600)의 화학성분의 경우 아래의 표와 같습니다. Element AMS5540 Nickel, min 72.00 Chromium 14.00 - 17.00 Iron 6.00 - 10.00 Manganese, max 1.00 Carbon, max 0.15 Copper, max 0.50 Silicon, max 0.50 Sulfur, max 0.015 Phosphorus, max 0.040 Cobalt, max 1.00 Columbium, max 1.00 Titanium, max 0.50 Tantalum, max 0.05 Aluminum, max 0.35 AMS5540 (ALLOY 600)의 기계적 성질은 아래와 같습니다. AMS5540 Tensile Stre

Naver Blog

EN 10025-6, S690QL PLATE

EN 10025-6은 Hot rolled products of structural steels — Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition의 규정입니다. 그 중 S690QL의 화학성분과 기계적 성질의 경우 아래의 표와 같습니다. S690QL (Steel number 1.8928) C, max 0.20 Si, max 0.80 Mn, max 1.70 P, max 0.020 S, max 0.010 B, max 0.005 Nb, max 0.06 V, min 0.12 Ti, max 0.05 Cr, max 1.50 Ni, max 2.0 Mo, max 0.70 Cu, max 0.50 N, max 0.015 Zr, max 0.15 S690QL Minimum yield strength, ReH MPa

Naver Blog

상호 변경 안내

더블유제이더블유컴퍼니 (WJW COMPANY) 가 임포트스틸 (IMPORT STEEL)로 상호명이 변경 되었습니다.

Naver Blog

EN ISO 683-17, 100Cr6 ROUND BAR

EN ISO 683-17은 Heat-treated steels, alloy steels and free-cutting steels Part 17: Ball and roller bearing steels의 규정입니다. 그 중 100Cr6의 화학성분의 경우 아래의 표와 같습니다. 100Cr6 C Si Mn P, max S, max Cr Mo, max Al, max Cu, max O, max 0.93 - 1.05 0.15 - 0.35 0.25 - 0.45 0.025 0.015 1.35 - 1.60 0.10 0.050 0.30 0.0015 EN ISO 683-17의 ROUND BAR에 적용 가능한 열처리 방식은 아래와 같습니다. Untreated None or + U Annealed (Soft annealed) +A Treated to hardness range +HR Annealed to achieve spheroidized carbides +AC Annealed to achieve sp

Naver Blog

EN 10028-2, P355GH PLATE

EN 10028-2는 Flat products made of steels for pressure purposes Part 2: Non-alloy and alloy steels with specified elevated temperature properties의 규정입니다. 그 중 P355GH의 화학성분과 기계적 성질의 경우 아래의 표와 같습니다. P355GH (Steel number 1.0473) C 0.10 - 0.22 Si, max 0.60 Mn 1.10 - 1.70 P, max 0.025 S, max 0.010 Al total, max 0.020 N, max 0.012 Cr, max 0.30 Ni, max 0.30 Mo, max 0.08 Nb, max 0.040 Cu, max 0.30 Ti, max 0.03 V, max 0.02 Cr+Cu+Mo+Ni, max 0.70 P355GH Minimum yield strength, ReH MPa Nominal thickness, mm ≤

Naver Blog

EN 10095, X10CrAlSi18 PLATE

EN 10095는 Heat resisting steels and nickel alloys의 규정입니다. 그 중 X10CrAlSi18 (DIN 1.4742)의 화학성분의 경우 아래의 표와 같습니다. Element X10CrAlSi18 (DIN 1.4742) C 0.12 이하 Si 0.70 - 1.40 Mn 1.00 이하 P 0.040 이하 S 0.015 이하 Cr 17.00 - 19.00 Al 0.70 - 1.20 EN 10095, X10CrAlSi18의 기계적 성질은 아래와 같습니다. THICKNESS (mm, max) HEAT TREATMENT CONDITION HARDNESS HB, max 0.2% PROOF STRENGTH Rp0.2 (MPa, min) TENSILE STRENGTH Rm, MPa A %, min Long products Flat products 0.5 ≤ a < 3 1, tr Flat products 3 < a 1, tr 12 +A 212 270 500 - 7

Naver Blog

EN 10028-2, 16Mo3 PLATE

EN 10028-2는 Flat products made of steels for pressure purposes Part 2: Non-alloy and alloy steels with specified elevated temperature properties의 규정입니다. 그 중 16Mo3의 화학성분과 기계적 성질의 경우 아래의 표와 같습니다. 16Mo3 (Steel number 1.5415) C 0.12 - 0.20 Si, max 0.35 Mn 0.40 - 0.90 P, max 0.025 S, max 0.010 N, max 0.012 Cr, max 0.30 Ni, max 0.30 Mo 0.25 - 0.35 Cu, max 0.30 16Mo3 Minimum yield strength, ReH MPa Nominal thickness, mm ≤ 16 > 16 ≤ 40 > 40 ≤ 60 > 60 ≤ 100 > 100 ≤ 150 > 150 ≤ 250 275 270 260 240 220 210

Naver Blog

EN 10025-3, S460NL STRUCTURAL STEEL

EN 10025-3은 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels의 규정입니다. 그 중 S460NL의 화학성분과 기계적 성질의 경우 아래의 표와 같습니다. S460NL (Steel number 1.8903) C, max 0.20 Si, max 0.60 Mn 1.00 - 1.70 P, max 0.025 S, max 0.020 Nb, max 0.05 V, max 0.20 Al total, min 0.02 Ti, max 0.05 Cr, max 0.30 Ni, max 0.80 Mo, max 0.10 Cu, max 0.55 N, max 0.025 S460NL Minimum yield strength, ReH MPa Nominal thickness, mm ≤ 16 > 1

Naver Blog

EN 10083-3, 39NiCrMo3 ROUND BAR

EN 10083-3은 Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels의 규정입니다. 그 중 39NiCrMo3의 화학성분의 경우 아래의 표와 같습니다. 39NiCrMo3 C Si, max Mn P, max S, max Cr Mo Ni 1.6510 (Steel number) 0.35 - 0.43 0.40 0.50 - 0.80 0.025 0.035 0.60 - 1.00 0.15 - 0.25 0.70 - 1.00 EN 10083-3, 39NiCrMo3의 기계적 성질은 아래와 같습니다. Heat treatment condition Diameter, mm Proof Strength, Rp0.2 min, MPa Tensile Strength, MPa Elongation after fracture, A %, min Reduction in area, Z %, min Hardness H

Naver Blog

AMS 5599 (ALLOY 625) PLATE

AMS5599는 ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT Nickel Base - 21.5Cr - 9.0Mo - 3.7(Cb + Ta)의 규정입니다. AMS 5599의 화학성분의 경우 아래의 표와 같습니다. Element AMS 5599 Carbon, max 0.10 Manganese, max 0.50 Silicon, max 0.50 Phosphorus, max 0.015 Sulfur, max 0.015 Chromium 20.00 - 23.00 Columbium (Niobium) 3.15 - 4.15 Cobalt (if determined), max 1.00 Molybdenum 8.00 - 10.00 Iron, max 5.00 Aluminum, max 0.40 Titanium, max 0.40 Nickel, min Remainder AMS 5599 (ALLOY 625)의 기계적 성질은 아래와 같습니다. Tensile

Naver Blog

JIS H 4600 TP340 티타늄 판재

JIS H 4600은 티타늄과 티타늄 합금 판재(チタン及びチタン合金−板及び条)의 규정입니다. 그 중 TP340재질은 공업용 순티타늄으로 내식성이 우수하며, 특히 내해수성에 탁월합니다. 화학장치, 석유정제장치, 펄프제지공업장치 등에 사용됩니다. TP340C - 냉간압연판재 TP340H - 열간압연판재 화학성분의 경우 아래의 표와 같습니다. C, max O, max N, max H, max I, max Ti TP340 0.08 0.20 0.03 0.013 0.25 balance JIS H 4600 TP340의 기계적 성질은 아래와 같습니다. Tensile Strength, MPa Yield Strength, MPa Elongation, % 340 - 510 215 이상 23 이상 JIS H 4600 TP340 비중은 4.51 g/cm ³ 입니다. JIS H 4600 TP340의 경우 주로 일본산을 수입하여 국내에 공급하고 있습니다. 입고 일정 및 재고 여부는 별도 연락 부탁드립니다.

Naver Blog

AMS5667 (ALLOY X750 EQUALIZED) ROUND BAR

AMS5667은 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Equalized, Precipitation Hardenable의 규정입니다. 그 중 ALLOY X750 EQUALIZED의 화학성분의 경우 아래의 표와 같습니다. Element AMS5667 (ALLOY X750 EQUALIZED) Carbon 0.08 max Manganese 1.00 max Silicon 0.50 max Sulfur 0.01 max Chromium 14.00 - 17.00 Cobalt 1.00 max Columbium (Nb) 0.70 - 1.20 Titanium 2.25 - 2.75 Aluminum 0.40 - 1.00 Iron 5.00 - 9.00 Tantalum 0.05 max Copper 0.50 max Nickel 70.00 mi

Naver Blog

ASTM A182 UNS K41545 (F5) FORGING

A182는 Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service의 규정입니다. 그 중 UNS K41545 (F5)의 화학성분의 경우 아래의 표와 같습니다. Element UNS K41545 (F5) Carbon, max 0.15 Manganese 0.30 - 0.60 Phosphorus, max 0.030 Sulfur, max 0.030 Silicon, max 0.50 Nickel, max 0.50 Chromium 4.0 - 6.0 Molybdenum 0.44 - 0.65 ASTM A182 UNS K41545 (F5)의 기계적 성질은 아래와 같습니다. Tensile Strength, min, ksi [MPa] Yield Strength, min, ksi [MPa] Elongation in 2 in. [50 mm] or 4D, min, % Re

Naver Blog

ASTM F15 KOVAR

ASTM F15는 Iron-Nickel-Cobalt Sealing Alloy의 규정입니다. 그 중 KOVAR의 화학성분의 경우 아래의 표와 같습니다. Element KOVAR Iron, nominal 53 Nickel, nominal 29 Cobalt, nominal 17 Manganese, max 0.50 Silicon, max 0.20 Carbon, max 0.04 Aluminum, max 0.10 Magnesium, max 0.10 Zirconium, max 0.10 Titanium, max 0.10 Copper, max 0.20 Chromium, max 0.20 Molybdenum, max 0.20 ASTM F15 KOVAR의 기계적 성질은 아래와 같습니다. Tensile Strength ksi MPa Strip and Sheet annealed (A) 82, max 570, max Strip and Sheet 1/4 hard (B) 75 - 90 520 - 630 Strip

Naver Blog

ASTM F1684 UNS K93500 (SUPER INVAR 32-5)

ASTM F1684는 Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications의 규정입니다. 그 중 UNS K93500 (SUPER INVAR 32-5)의 화학성분의 경우 아래의 표와 같습니다. Element UNS K93500 (SUPER INVAR 32-5) Iron, nominal remainder Nickel, nominal 32 Cobalt, max 5 Manganese, max 0.60 Silicon, max 0.25 Carbon, max 0.05 Aluminum, max 0.10 Magnesium, max 0.10 Zirconium, max 0.10 Titanium, max 0.10 Chromium, max 0.25 Phosphorus, max 0.015 Sulfer, max 0.015 ASTM F1684 UNS K93500 (SUPER INVAR 32-5)의 기계적 성질은 아래와 같

Naver Blog

ASTM F1684 UNS K93603 (INVAR36)

ASTM F1684는 Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications의 규정입니다. 그 중 UNS K93603 (INVAR36)의 화학성분의 경우 아래의 표와 같습니다. Element UNS K93603 (INVAR36) Iron, nominal remainder Nickel, nominal 36 Cobalt, max 0.50 Manganese, max 0.60 Silicon, max 0.40 Carbon, max 0.05 Aluminum, max 0.10 Magnesium, max 0.10 Zirconium, max 0.10 Titanium, max 0.10 Chromium, max 0.25 Phosphorus, max 0.015 Sulfer, max 0.015 ASTM F1684 UNS K93603 (INVAR36)의 기계적 성질은 아래와 같습니다. Tensile Strength Yi

Naver Blog

ASTM A638 UNS S66286 (Gr. 660) ROUND BAR

ASTM A638은 Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service의 규정입니다. 그 중 UNS S66286 (Gr. 660)의 화학성분의 경우 아래의 표와 같습니다. Element UNS S66286 (Gr. 660) Carbon, max 0.08 Manganese, max 2.00 Phosphorus, max 0.040 Silicon, max 1.00 Sulfur, max 0.030 Chromium 13.50 - 16.00 Molybdenum 1.00 - 1.50 Nickel 24.00 - 27.00 Titanium 1.90 - 2.35 Aluminum, max 0.35 Vanadium 0.10 - 0.50 Boron 0.0010 - 0.010 ASTM A638 UNS S66286 (Gr. 660)의 기계적 성질은 아래와 같습니다. so

Naver Blog

ASTM A276 UNS N08926 (ALLOY 926) ROUND BAR

ASTM A276은 Stainless Steel Bars and Shapes의 규정입니다. 그 중 UNS N08926 (ALLOY 926)의 화학성분의 경우 아래의 표와 같습니다. Element UNS N08926 (ALLOY 926) Carbon, max 0.020 Manganese, max 2.00 Phosphorus, max 0.030 Sulfur, max 0.015 Silicon, max 0.50 Nickel 24.0 - 26.0 Chromium 19.0 - 21.0 Molybdenum 6.0 - 7.0 Nitrogen 0.15 - 0.25 Copper 0.50 - 1.50 ASTM A276 UNS N08926 (ALLOY 926)의 기계적 성질은 아래와 같습니다. N08926 Tensile Strength, min Yield Strength, min Elongation in 2 in. [50 mm] or 4D min % Reduction of Area, min, % Brin

Naver Blog

EN 10088-3, X2CrNiMoN17-13-5 ROUND BAR

EN 10088-3은 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes의 규정입니다. 그 중 X2CrNiMoN17-13-5 (DIN 1.4439)의 화학성분의 경우 아래의 표와 같습니다. Element X2CrNiMoN17-13-5 (DIN 1.4439) Carbon ≤ 0.030 Manganese ≤ 2.00 Phosphorus ≤ 0.045 Sulfur ≤ 0.015 Silicon ≤ 1.00 Nickel 12.5 - 14.5 Chromium 16.5 - 18.5 Molybdenum 4.0 - 5.0 Nitrogen 0.12 - 0.22 EN 10088-3, X2CrNiMoN17-13-5의 기계적 성질은 아

Naver Blog

ASTM A479 UNS S30815 (253MA) ROUND BAR

ASTM A479는 Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels의 규정입니다. 그 중 UNS S30815의 화학성분의 경우 아래의 표와 같습니다. Element UNS S30815 (253MA) Carbon 0.05 - 0.10 Manganese, max 0.80 Phosphorus, max 0.040 Sulfur, max 0.030 Silicon 1.40 - 2.00 Nickel 10.0 - 12.0 Chromium 20.0 - 22.0 Nitrogen 0.14 - 0.20 Cerium 0.03 - 0.08 ASTM A479 UNS S30815 (253MA)의 기계적 성질은 아래와 같습니다. Tensile Strength, min, ksi (MPa) Yield Strength, min, ksi (MPa) Elongation in 2 in. [50 mm] or 4D, min, % Reduc

Naver Blog

ASTM A276 UNS S44600 (TP446) ROUND BAR

ASTM A276은 Stainless Steel Bars and Shapes의 규정입니다. 그 중 UNS S44600 (TP446)의 화학성분의 경우 아래의 표와 같습니다. Element S44600 (TP446) Carbon, max 0.20 Manganese, max 1.50 Phosphorus, max 0.040 Silicon, max 1.00 Sulfur, max 0.030 Chromium 23.0 - 27.0 Nitrogen, max 0.25 Nickel, max 0.75 ASTM A276 UNS S44600 (TP446)의 기계적 성질은 아래와 같습니다. S44600 Tensile Strength, min Yield Strength, min Elongation in 2 in. [50 mm] or 4D min % Reduction of Area, min, % Brinell Hardness, HBW unless otherwise indicated, max ksi MPa ksi

Naver Blog

JIS G 4303 SUS321 스테인레스 환봉

JIS G 4303은 스테인레스 환봉의 규정입니다. 그 중 SUS321의 화학성분의 경우 아래의 표와 같습니다. Element SUS321 C 0.08 이하 Si 1.00 이하 Mn 2.00 이하 P 0.045 이하 S 0.030 이하 Cr 17.00 - 19.00 Ni 9.00 - 13.00 Ti 5 * C % 이상 JIS G 4303 SUS321의 기계적 성질은 아래와 같습니다. Yield point or Proof stress (N/) Tensile strength (N/) Elongation, % Reduction of area, % Brinell HBW / HB Rockwell B HRBS / HRBW Vickers HV 205 이상 520 이상 40 이상 50 이상 187 이하 90 이하 200 이하 JIS G 4303 SUS321 비중은 7.9 g/cm ³ 입니다. JIS G 4303 SUS321은 일본산으로 공급 가능합니다. 입고 일정 및 재고 여부는 별도 연락 부탁드

Naver Blog

ASTM A790 UNS S32760 (F55) PIPE

ASTM A790은 Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe의 규정입니다. 그 중 UNS S32760 (F55)의 화학성분의 경우 아래의 표와 같습니다. Element UNS S32760 (F55) Carbon, max 0.05 Manganese, max 1.00 Phosphorus, max 0.030 Sulfur, max 0.010 Silicon, max 1.00 Nickel 6.0 - 8.0 Chromium 24.0 - 26.0 Molybdenum 3.0 - 4.0 Nitrogen 0.20 - 0.30 Copper 0.50 - 1.00 Tungsten 0.50 - 1.00 40 min (%Cr + 3.3 * % Mo + 16 * %N) ASTM A790 UNS S32760 (F55)의 기계적 성질은 아래와 같습니다. Tensile Strength, min, ksi (MPa) Yield Strength, min,

Naver Blog

ASTM B171 UNS C70600 CuNi 90/10 PLATE

ASTM B171은 Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers의 규정입니다. 그 중 UNS C70600 CuNi 90/10의 화학성분의 경우 아래의 표와 같습니다. Element UNS C70600 Copper, incl Silver remainder Nickel, incl Cobalt 9.0 - 11.0 Lead, max 0.05 Iron 1.0 - 1.8 Zinc, max 1.0 Manganese, max 1.0 ASTM B171 UNS C70600 CuNi 90/10의 기계적 성질은 아래와 같습니다. Temper Designation Thickness, mm Tensile Strength, min, MPa Yield Strength 0.2 % Offset, min, MPa Elongation in 2 in. [50.0 mm], min, % O25, M20 60 이하 275

Naver Blog

ASTM B171 UNS C71500 COPPER-NICKEL (CuNi 70/30) PLATE

ASTM B171은 Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers의 규정입니다. 그 중 UNS C71500 COPPER-NICKEL (CuNi 70/30)의 화학성분의 경우 아래의 표와 같습니다. Element C71500 Copper, Incl Silver remainder Nickel, Incl Cobalt 29.0 - 33.0 Lead, max 0.05 Iron 0.40 - 1.0 Manganese, max 1.0 Zinc, max 1.0 ASTM B171 UNS C71500 COPPER-NICKEL (CuNi 70/30)의 기계적 성질은 아래와 같습니다. Temper Designation Thickness, mm Tensile Strength, min, MPa Yield Strength 0.2 % Offset, min, MPa Elongation in 2 in. [50.0 m

Naver Blog

ASTM A666 UNS S21904 (NITRONIC 40, XM-11) PLATE

ASTM A666은 Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar의 규정입니다. 소재 관련 문의사항은 아래의 사이트 또는 전화, E-mail로 연락부탁드립니다. http://wjwcompany.co.kr/16 WJW COMPANY 한국 · 중국 · 일본 중심 무역상사 wjwcompany.co.kr 그 중 UNS S21904 (NITRONIC 40, XM-11)의 화학성분의 경우 아래의 표와 같습니다. Element S21904 (NITRONIC 40, XM-11) Carbon, max 0.04 Manganese 8.0 - 10.0 Phosphorus, max 0.060 Silicon, max 0.75 Sulfur, max 0.030 Chromium 19.0 - 21.5 Nitrogen 0.15 - 0.40 Nickel 5.5 - 7.5 ASTM A666 UNS S21904 (NI

Naver Blog

ASTM B164 UNS N04405 (ALLOY 405) ROUND BAR

ASTM B164는 Nickel-Copper Alloy Rod, Bar, and Wire의 규정입니다. 소재 관련 문의사항은 아래의 사이트 또는 전화, E-mail로 연락부탁드립니다. http://wjwcompany.co.kr/16 WJW COMPANY 한국 · 중국 · 일본 중심 무역상사 wjwcompany.co.kr 그 중 UNS N04405 (ALLOY 405)의 화학성분의 경우 아래의 표와 같습니다. Element UNS N04405 Nickel, min 63.0 Copper 28.0 - 34.0 Iron, max 2.5 Manganese, max 2.0 Carbon, max 0.3 Silicon, max 0.5 Sulfur 0.025 - 0.060 ASTM B164 UNS N04405 (ALLOY 405)의 기계적 성질은 아래와 같습니다. UNS N04405 (ALLOY 405) Tensile Strength, min, psi (MPa) Yield Strength (0.2

Naver Blog

AMS6472 (NITRIDING 135 MOD, UNS K24065) ROUND BAR

AMS6472는 Steel, Bars and Forgings and Forging Stock, Nitriding, 1.6Cr - 0.35Mo - 1.1Al (0.38 - 0.43C) (135 Mod), Aircraft Quality, Hardened and Tempered, 112 ksi (772 MPa) Tensile Strength의 규정입니다. 소재 관련 문의사항은 아래의 사이트 또는 전화, E-mail로 연락부탁드립니다. http://wjwcompany.co.kr/16 WJW COMPANY 한국 · 중국 · 일본 중심 무역상사 wjwcompany.co.kr 그 중 AMS6472 (NITRIDING 135 MOD, UNS K24065)의 화학성분의 경우 아래의 표와 같습니다. Element AMS6472 (NITRIDING 135 MOD, UNS K24065) Carbon 0.38 - 0.43 Manganese 0.50 - 0.80 Silicon 0.20 - 0.40 Phosp

Naver Blog

ASTM A564 UNS S35500 (TP634, AM-355) ROUND BAR

A564는 Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes의 규정입니다. 소재 관련 문의사항은 아래의 사이트 또는 전화, E-mail로 연락부탁드립니다. http://wjwcompany.co.kr/ WJW COMPANY 한국 · 중국 · 일본 중심 무역상사 wjwcompany.co.kr 그 중 UNS S35500 (TP634, AM-355)의 화학성분의 경우 아래의 표와 같습니다. Element UNS S35500 (TP634, AM-355) Carbon 0.10 - 0.15 Manganese 0.50 - 1.25 Phosphorus, max 0.040 Sulfur, max 0.030 Silicon, max 0.50 Nickel 4.00 - 5.00 Chromium 15.00 - 16.00 Molybdenum 2.50 - 3.25 Nitrogen 0.07 - 0.13 ASTM A564 UNS S35

Naver Blog

ASTM A276 UNS S21900 (NITRONIC 40, XM-10) ROUND BAR

ASTM A276은 Stainless Steel Bars and Shapes의 규정입니다. 소재 관련 문의사항은 아래의 사이트 또는 전화, E-mail로 연락부탁드립니다. http://wjwcompany.co.kr/16 WJW COMPANY 한국 · 중국 · 일본 중심 무역상사 wjwcompany.co.kr 그 중 UNS S21900 (NITRONIC 40, XM-10)의 화학성분의 경우 아래의 표와 같습니다. Element S21900 (NITRONIC 40, XM-10) Carbon, max 0.08 Manganese 8.0 - 10.0 Phosphorus, max 0.045 Silicon, max 1.00 Sulfur, max 0.030 Chromium 19.0 - 21.5 Nitrogen 0.15 - 0.40 Nickel 5.5 - 7.5 ASTM A276 UNS S21900 (NITRONIC 40, XM-10)의 기계적 성질은 아래와 같습니다. S21900 Tensile S

Naver Blog

ASTM B150 UNS C63000 Nickel Aluminum Bronze ROUND BAR

ASTM B150은 Aluminum Bronze Rod, Bar, and Shapes의 규정입니다. 소재 관련 문의사항은 아래의 사이트 또는 전화, E-mail로 연락부탁드립니다. http://wjwcompany.co.kr/16 WJW COMPANY 한국 · 중국 · 일본 중심 무역상사 wjwcompany.co.kr 그 중 UNS C63000의 화학성분의 경우 아래의 표와 같습니다. Element C63000 Aluminum 9.0 - 11.0 Copper, Incl Silver remainder Nickel, Incl Cobalt 4.0 - 5.5 Silicon, max 0.25 Iron 2.0 - 4.0 Manganese, max 1.5 Zinc, max 0.30 Tin, max 0.20 ASTM B150 UNS C63000의 기계적 성질은 아래와 같습니다. Temper Designation Diameter or Distance Between Parallel Surfaces, m

Naver Blog

ASTM A240 UNS N08926 (ALLOY 926) PLATE

ASTM A240은 Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications의 규정입니다. 소재 관련 문의사항은 아래의 사이트 또는 전화, E-mail로 연락부탁드립니다. http://wjwcompany.co.kr/16 WJW COMPANY 한국 · 중국 · 일본 중심 무역상사 wjwcompany.co.kr 그 중 UNS N08926 (ALLOY 926)의 화학성분의 경우 아래의 표와 같습니다. Element UNS N08926 (ALLOY 926) Carbon, max 0.020 Manganese, max 2.00 Phosphorus, max 0.030 Sulfur, max 0.010 Silicon, max 0.50 Nickel 24.0 - 26.0 Chromium 19.0 - 21.0 Molybdenum 6.00 - 7.00

Naver Blog

JIS G 4053 SNC815 기계 구조용 합금 환봉

JIS G 4053은 기계 구조용 합금강 강재(機械構造用合金鋼鋼材)의 규정입니다. 소재 관련 문의사항은 아래의 사이트 또는 전화, E-mail로 연락부탁드립니다. http://wjwcompany.co.kr/16 WJW COMPANY 한국 · 중국 · 일본 중심 무역상사 wjwcompany.co.kr 니켈크롬강에 속하는 SNC815의 화학성분의 경우 아래의 표와 같습니다. C Mn P S Si Cr Ni Cu 0.12 - 0.18 0.35 - 0.65 0.030 이하 0.030 이하 0.15 - 0.35 0.60 - 1.00 3.00 - 3.50 0.30 이하 JIS G 4053 SNC815의 비중은 7.85 g/cm ³ 입니다. JIS G 4053 SNC815의 경우 주로 일본산을 수입하여 국내에 공급하고 있습니다. 입고 일정 및 재고 여부는 별도 연락 부탁드립니다.

Naver Blog

JIS G 4053 SNC415 기계 구조용 합금 환봉

JIS G 4053은 기계 구조용 합금강 강재(機械構造用合金鋼鋼材)의 규정입니다. 소재 관련 문의사항은 아래의 사이트 또는 전화, E-mail로 연락부탁드립니다. http://wjwcompany.co.kr/16 WJW COMPANY 한국 · 중국 · 일본 중심 무역상사 wjwcompany.co.kr 니켈크롬강에 속하는 SNC415의 화학성분의 경우 아래의 표와 같습니다. C Mn P S Si Cr Ni Cu 0.12 - 0.18 0.35 - 0.65 0.030 이하 0.030 이하 0.15 - 0.35 0.20 - 0.50 2.00 - 2.50 0.30 이하 JIS G 4053 SNC415의 비중은 7.85 g/cm ³ 입니다. JIS G 4053 SNC415의 경우 주로 일본산을 수입하여 국내에 공급하고 있습니다. 입고 일정 및 재고 여부는 별도 연락 부탁드립니다.

Naver Blog

JIS G 4053 SNC631 기계 구조용 합금 환봉

JIS G 4053은 기계 구조용 합금강 강재(機械構造用合金鋼鋼材)의 규정입니다. 소재 관련 문의사항은 아래의 사이트 또는 전화, E-mail로 연락부탁드립니다. http://wjwcompany.co.kr/16 WJW COMPANY 한국 · 중국 · 일본 중심 무역상사 wjwcompany.co.kr 니켈크롬강에 속하는 SNC631의 화학성분의 경우 아래의 표와 같습니다. C Mn P S Si Cr Ni Cu 0.27 - 0.35 0.35 - 0.65 0.030 이하 0.030 이하 0.15 - 0.35 0.60 - 1.00 2.50 - 3.00 0.30 이하 JIS G 4053 SNC631의 비중은 7.85 g/cm ³ 입니다. JIS G 4053 SNC631의 경우 주로 일본산을 수입하여 국내에 공급하고 있습니다. 입고 일정 및 재고 여부는 별도 연락 부탁드립니다.

Naver Blog

JIS G 4053 SNCM630 기계 구조용 합금 환봉

JIS G 4053은 기계 구조용 합금강 강재(機械構造用合金鋼鋼材)의 규정입니다. 소재 관련 문의사항은 아래의 사이트 또는 전화, E-mail로 연락부탁드립니다. http://wjwcompany.co.kr/16 WJW COMPANY 한국 · 중국 · 일본 중심 무역상사 wjwcompany.co.kr 니켈크롬몰리브덴강에 속하는 SNCM630의 화학성분의 경우 아래의 표와 같습니다. C Mn P S Si Cr Mo Ni Cu 0.25 - 0.35 0.35 - 0.60 0.030 이하 0.030 이하 0.15 - 0.35 2.50 - 3.50 0.50 - 0.70 2.50 - 3.50 0.30 이하 JIS G 4053 SNCM630의 비중은 7.85 g/cm ³ 입니다. JIS G 4053 SNCM630의 경우 주로 일본산을 수입하여 국내에 공급하고 있습니다. 입고 일정 및 재고 여부는 별도 연락 부탁드립니다.

Naver Blog

JIS G 4053 SNCM447 기계 구조용 합금 환봉

JIS G 4053은 기계 구조용 합금강 강재(機械構造用合金鋼鋼材)의 규정입니다. 소재 관련 문의사항은 아래의 사이트 또는 전화, E-mail로 연락부탁드립니다. http://wjwcompany.co.kr/16 WJW COMPANY 한국 · 중국 · 일본 중심 무역상사 wjwcompany.co.kr 니켈크롬몰리브덴강에 속하는 SNCM447의 화학성분의 경우 아래의 표와 같습니다. C Mn P S Si Cr Mo Ni Cu 0.44 - 0.50 0.60 - 0.90 0.030 이하 0.030 이하 0.15 - 0.35 0.60 - 1.00 0.15 - 0.30 1.60 - 2.00 0.30 이하 JIS G 4053 SNCM447의 비중은 7.85 g/cm ³ 입니다. JIS G 4053 SNCM447의 경우 주로 일본산을 수입하여 국내에 공급하고 있습니다. 입고 일정 및 재고 여부는 별도 연락 부탁드립니다.

Naver Blog

JIS G 4053 SNCM439 기계 구조용 합금 환봉

JIS G 4053은 기계 구조용 합금강 강재(機械構造用合金鋼鋼材)의 규정입니다. 소재 관련 문의사항은 아래의 사이트 또는 전화, E-mail로 연락부탁드립니다. http://wjwcompany.co.kr/16 WJW COMPANY 한국 · 중국 · 일본 중심 무역상사 wjwcompany.co.kr 니켈크롬몰리브덴강에 속하는 SNCM439의 화학성분의 경우 아래의 표와 같습니다. C Mn P S Si Cr Mo Ni Cu 0.36 - 0.43 0.60 - 0.90 0.030 이하 0.030 이하 0.15 - 0.35 0.60 - 1.00 0.15 - 0.30 1.60 - 2.00 0.30 이하 JIS G 4053 SNCM439의 비중은 7.85 g/cm ³ 입니다. JIS G 4053 SNCM439의 경우 주로 일본산을 수입하여 국내에 공급하고 있습니다. 입고 일정 및 재고 여부는 별도 연락 부탁드립니다.

Naver Blog

ASTM A240 UNS S32101 (LDX2101) PLATE

ASTM A240은 Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications의 규정입니다. 소재 관련 문의사항은 아래의 사이트 또는 전화, E-mail로 연락부탁드립니다. http://wjwcompany.co.kr/16 WJW COMPANY 한국 · 중국 · 일본 중심 무역상사 wjwcompany.co.kr 그 중 UNS S32101 (LDX2101)의 화학성분의 경우 아래의 표와 같습니다. Element UNS S32101 (LDX2101) Carbon, max 0.040 Manganese 4.00 - 6.00 Phosphorus, max 0.040 Sulfur, max 0.030 Silicon, max 1.00 Nickel 1.35 - 1.70 Chromium 21.0 - 22.0 Molybdenum 0.10 - 0.80 Ni

Naver Blog

EN 10095, X15CrNiSi25-21 PLATE

EN 10095는 Heat resisting steels and nickel alloys의 규정입니다. 소재 관련 문의사항은 아래의 사이트 또는 전화, E-mail로 연락부탁드립니다. http://wjwcompany.co.kr/16 WJW COMPANY 한국 · 중국 · 일본 중심 무역상사 wjwcompany.co.kr 그 중 X15CrNiSi25-21 (DIN 1.4841)의 화학성분의 경우 아래의 표와 같습니다. Element X15CrNiSi25-21 (DIN 1.4841) C 0.20 이하 Si 1.50 - 2.50 Mn 2.00 이하 P 0.045 이하 S 0.015 이하 Cr 24.00 - 26.00 Ni 19.00 - 22.00 N 0.11 이하 EN 10095, X15CrNiSi25-21의 기계적 성질은 아래와 같습니다. THICKNESS (mm, max) HEAT TREATMENT CONDITION HARDNESS HB, max PROOF STRENGTH Rp0.2

Naver Blog

[정답지 판매] 철강규격에 없는 추가 화학성분은 왜 있는걸까?

철강 소재를 다루다보면 가장 먼저 접하게 되는 서류인 소재성적서! Mill test report, Mill Certificate, Mill test certification, Mill sheet... 다양한 용어로 불리는 핵심 서류 성! 적! 서! 성적서에는 해당 소재의 대한 다양한 내용이 담겨져 있는데, 가장 중요한 것이 바로 화학성분과 기계적 성질이죠 하지만! 성적서에 규정 외 화학성분이 들어가있는 것을 보고 궁금한 적이 없으셨나요? 정답지가 필요하세요? 간단히 문제를 해결하세요 * 해당 내용은 구매 하신 후 환불이 불가능한 상품입니다 * 당사 전문가의 자체적인 해설집으로서 '노클레임' 조건으로만 판매됩니다 (ASTM 규격 내에 기재되어있는 내용을 정리하여 해설함) * 구매 후 재판매 및 제3자 유포를 엄격히 금지 합니다 * 세금계산서 발행 가능합니다 * 당사와 기존에 거래하셨던 고객사분들이라면 별도 연락부탁드립니다

Naver Blog

JIS G 4053 SNC836 기계 구조용 합금 환봉

JIS G 4053은 기계 구조용 합금강 강재(機械構造用合金鋼鋼材)의 규정입니다. 소재 관련 문의사항은 아래의 사이트 또는 전화, E-mail로 연락부탁드립니다. http://wjwcompany.co.kr/16 WJW COMPANY 한국 · 중국 · 일본 중심 무역상사 wjwcompany.co.kr 니켈크롬강에 속하는 SNC836의 화학성분의 경우 아래의 표와 같습니다. C Mn P S Si Cr Ni Cu 0.32 - 0.40 0.35 - 0.65 0.030 이하 0.030 이하 0.15 - 0.35 0.60 - 1.00 3.00 - 3.50 0.30 이하 JIS G 4053 SNC836의 비중은 7.85 g/cm ³ 입니다. JIS G 4053 SNC836의 경우 주로 일본산을 수입하여 국내에 공급하고 있습니다. 입고 일정 및 재고 여부는 별도 연락 부탁드립니다.

Naver Blog

EN 10083-3, 34CrNiMo6 ROUND BAR

EN 10083-3은 Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels의 규정입니다. 소재 관련 문의사항은 아래의 사이트 또는 전화, E-mail로 연락부탁드립니다. http://wjwcompany.co.kr/16 WJW COMPANY 한국 · 중국 · 일본 중심 무역상사 wjwcompany.co.kr 그 중 34CrNiMo6의 화학성분의 경우 아래의 표와 같습니다. 34CrNiMo6 C Si, max Mn P, max S, max Cr Mo Ni 1.6582 (Steel number) 0.30 - 0.38 0.40 0.50 - 0.80 0.025 0.035 1.30 - 1.70 0.15 - 0.30 1.30 - 1.70 EN 10083-3, 34CrNiMo6의 기계적 성질은 아래와 같습니다. Heat treatment condition Diameter, mm Proof

Naver Blog

JIS G 4303 SUS403 스테인레스 환봉

JIS G 4303은 스테인레스 환봉의 규정입니다. 소재 관련 문의사항은 아래의 사이트 또는 전화, E-mail로 연락부탁드립니다. http://wjwcompany.co.kr/16 WJW COMPANY 한국 · 중국 · 일본 중심 무역상사 wjwcompany.co.kr 그 중 SUS403의 화학성분의 경우 아래의 표와 같습니다. Element SUS403 C 0.15 이하 Si 0.50 이하 Mn 1.00 이하 P 0.040 이하 S 0.030 이하 Cr 11.50 - 13.00 * Ni값은 0.60%를 넘어서는 안됨. JIS G 4303 SUS403의 기계적 성질은 아래와 같습니다. Yield point or Proof stress (N/) Tensile strength (N/) Elongation, % Reduction of area, % Brinell HBW / HB Rockwell B HRBS / HRBW Vickers HV 390 이상 590 이상 25 이상 55 이상 17

Naver Blog

JIS G 4304 SUS317L 열간압연 강판, 코일

JIS G 4304는 열간압연 스테인레스 강판, 코일의 규정입니다. 소재 관련 문의사항은 아래의 사이트 또는 전화, E-mail로 연락부탁드립니다. http://wjwcompany.co.kr/16 WJW COMPANY 한국 · 중국 · 일본 중심 무역상사 wjwcompany.co.kr 그 중 SUS317L의 화학성분의 경우 아래의 표와 같습니다. Element SUS317L C 0.030 이하 Si 1.00 이하 Mn 2.00 이하 P 0.045 이하 S 0.030 이하 Cr 18.00 - 20.00 Ni 11.00 - 15.00 Mo 3.00 - 4.00 JIS G 4304 SUS317L의 기계적 성질은 아래와 같습니다. Yield point or Proof stress (N/) Tensile strength (N/) Elongation, % Brinell HBW / HB Rockwell B HRBS / HRBW Vickers HV 175 이상 480 이상 40 이상 187 이하

Naver Blog

JIS G 4303 SUS317L 스테인레스 환봉

JIS G 4303은 스테인레스 환봉의 규정입니다. 소재 관련 문의사항은 아래의 사이트 또는 전화, E-mail로 연락부탁드립니다. http://wjwcompany.co.kr/16 WJW COMPANY 한국 · 중국 · 일본 중심 무역상사 wjwcompany.co.kr 그 중 SUS317L의 화학성분의 경우 아래의 표와 같습니다. Element SUS317L C 0.030 이하 Si 1.00 이하 Mn 2.00 이하 P 0.045 이하 S 0.030 이하 Cr 18.00 - 20.00 Ni 11.00 - 15.00 Mo 3.00 - 4.00 JIS G 4303 SUS317L의 기계적 성질은 아래와 같습니다. Yield point or Proof stress (N/) Tensile strength (N/) Elongation, % Reduction of area, % Brinell HBW / HB Rockwell B HRBS / HRBW Vickers HV 175 이상 480 이상 4

Naver Blog

JIS G 4305 SUS443J1 냉간압연 강판, 코일

JIS G 4305은 냉간압연 스테인레스 강판, 코일의 규정입니다. 소재 관련 문의사항은 아래의 사이트 또는 전화, E-mail로 연락부탁드립니다. http://wjwcompany.co.kr/16 WJW COMPANY 한국 · 중국 · 일본 중심 무역상사 wjwcompany.co.kr 그 중 SUS443J1의 화학성분의 경우 아래의 표와 같습니다. Element SUS443J1 C 0.025 이하 Si 1.00 이하 Mn 1.00 이하 P 0.040 이하 S 0.030 이하 Cr 20.00 - 23.00 N 0.025 이하 Cu 0.30 - 0.80 Ti, Nb, Zr 또는 그 합 8×(C %+N %)- 0.80 JIS G 4305 SUS443J1의 기계적 성질은 아래와 같습니다. Yield point or Proof stress (N/) Tensile strength (N/) Elongation, % Brinell HBW / HB Rockwell B HRBS / HRB Vicker

Naver Blog

JIS G 4053 SNCM616 기계 구조용 합금 환봉

JIS G 4053은 기계 구조용 합금강 강재(機械構造用合金鋼鋼材)의 규정입니다. 소재 관련 문의사항은 아래의 사이트 또는 전화, E-mail로 연락부탁드립니다. http://wjwcompany.co.kr/16 WJW COMPANY 한국 · 중국 · 일본 중심 무역상사 wjwcompany.co.kr 니켈크롬몰리브덴강에 속하는 SNCM616의 화학성분의 경우 아래의 표와 같습니다. C Mn P S Si Cr Mo Ni Cu 0.13 - 0.20 0.80 - 1.20 0.030 이하 0.030 이하 0.15 - 0.35 1.40 - 1.80 0.40 - 0.60 2.80 - 3.20 0.30 이하 JIS G 4053 SNCM616의 비중은 7.85 g/cm ³ 입니다. JIS G 4053 SNCM616의 경우 주로 일본산을 수입하여 국내에 공급하고 있습니다. 입고 일정 및 재고 여부는 별도 연락 부탁드립니다.

Naver Blog

JIS G 4053 SNCM815 기계 구조용 합금 환봉

JIS G 4053은 기계 구조용 합금강 강재(機械構造用合金鋼鋼材)의 규정입니다. 소재 관련 문의사항은 아래의 사이트 또는 전화, E-mail로 연락부탁드립니다. http://wjwcompany.co.kr/16 WJW COMPANY 한국 · 중국 · 일본 중심 무역상사 wjwcompany.co.kr 니켈크롬몰리브덴강에 속하는 SNCM815의 화학성분의 경우 아래의 표와 같습니다. C Mn P S Si Cr Mo Ni Cu 0.12 - 0.18 0.30 - 0.60 0.030 이하 0.030 이하 0.15 - 0.35 0.70 - 1.00 0.15 - 0.30 4.00 - 4.50 0.30 이하 JIS G 4053 SNCM815의 비중은 7.85 g/cm ³ 입니다. JIS G 4053 SNCM815의 경우 주로 일본산을 수입하여 국내에 공급하고 있습니다. 입고 일정 및 재고 여부는 별도 연락 부탁드립니다.

1 2 3 4